sidewall conveyor belt manufacturers in china

  • Comments Off on sidewall conveyor belt manufacturers in china
  • A+

Brief Introduction

Sidewall belt conveyor is continuous transporting equipment for loose bulk materials such as coke, coal, limestone, sand and gravel. It adopts high quality conveyor belt with corrugated sidewall and horizontal baffle. Sidewall belts are used to convey material up inclines. The sidewall increases the carrying capacity of the belt and prevents product from falling off the edges of the belt. Hot vulcanization provides 5 times greater adhesion between the belt and sidewall, eliminating the need for bolting the sidewall to the base belt. Greater adhesion also prevents the sidewall from lifting and separating from the base belt, extending the belt life.


Working Principles


The horizontal loading section leads a deflection wheel bends the belt into the feeding of the bulk material takes place on a mostly horizontal feed path, where the side wall belt is supported by loading impact idlers. The feeding of the conveyed material can be achieved by direct feeding from a hopper, over a chute, a feeding belt or a feeding pulley. The selection of the optimum feeding station depends on the properties of the bulk material and the belt speed of the vertical conveyor. The upward and downward strands are encased from the bottom to the top. Substructures or support rollers are not necessary in this section.
The vertical section leads over a deflection curve into the horizontal discharge section. The deflection curve is made up of a number of high specification pulleys. These pulleys experience the vectored load of deflecting the belt tension from vertical to horizontal.
At the drive pulley, the bulk material is discharged and the belt is returned to the back going strand. Depending on the bulk material properties, the drive pulley is followed by a beater wheel for belt cleaning in the return side. The beater is self-driven. Material that fails from the belt goes into the main delivery chute. Lateral deflection wheels turn the belt from the horizontal back to the vertical.



Sidewall belt conveyor can be used in coal, chemical industry, building materials, metallurgy, electric power, light industry, food, port, shipping and other industries, in the working environment that the humidity is -15 degree to +40 degree, transport a variety of bulk materials which density is 0.5-2.5t/m3.


Advantages & Features


  1. Widely used, can transfer all kinds of bulk material in different angles and directions.
  2. No transfer points- the belt are capable of turning at any angle right from feed hopper to discharge point
  3. No spillage at the steep angle when transfer bulk material.
  4. Maximum utilization of space – able to convey material at angles up to 90 degree, able to instead of bucket elevator.
  5. Low power requirement, low cost, long service life and quiet smooth running.


Selection Conditions


♦Material to be processed: _____

♦Max. granule size of the feeding material: _____mm

♦Handling capacity (Ps. It means the total material capacity feeding from the inlet): _____t/h

♦Percentage of Max. granule in material:_________%

♦Upstream equipment (Ps. It means what kind of Equipment is used to feed the material):____

♦Bulk Density: _____t/m3

♦Material temperature: _____℃;

♦Downstream equipment (Ps. It means what kind of equipment is used to discharge the material): _____

♦Water content:____%

♦Material is corrosive or not: ____ (Ps. Yes or No)

♦Working power supply: _____V ______HZ

♦Material is sticky or not: ____ (Ps. Yes or No)

♦Working environment is indoor or outdoor: ______________

♦Working environment temperature: ______ ℃

♦Please refer to the following picture and provide the relevant parameters:L1____m, L2___m, H___m, α____°

Technical parameter



Belt width(mm) Cleat height(mm) Handling capacity(m3/h) Belt speed(m/s) Inclination arrange(°)
500 80 11-84 0.8-2.5 30-90
650 100 23-180
800 120 36-280
1000 160 45-500
1200 200 57-800



  • Coal and wood-chip fired power stations
  • Underground mining (coal and ore)
  • Shaft conveying for tunnelling and underground mining
  • Steel industry
  • Ship loading and unloading, ship to ship loading
  • Sand preparation in foundry plants
  • Silo feeding
  • Slope conveying in openpit mining
  • Waste recycling, soil purification and water treatment
  • Handling of large material flows in the horizontal path